Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design a Wilkinson power divider as feed network for a patch rectangular array.

Status
Not open for further replies.
Y

Yunierys1994

Newbie level 4
Joined
Mar 22, 2017
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
51
Hello all:
I need to design in HFSS a wilkinson divider for a 2x2 recatangular array. I'm looking for some tutorial of this kind of design in HFSS. If you can share with me this information i'll be grateful.
Thanks,
Regads.

Yunierys.:shock:
 

I need to know how can i calculate the width of the lines for 50 and 70.71 omh?
 

Hello all,
i know now how to calculate the width,thanks by the way, but i need to know how can i put a resistance in HFSS.
 

Yunierys1994 said:
Hello all,
i know now how to calculate the width,thanks by the way, but i need to know how can i put a resistance in HFSS.
Click to expand...

In HFSS draw a small rectangle between two points where resistance to be added and assign boundary as lumped element and write the value of resistance in that say 100ohm.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top