+ Post New Thread
Results 1 to 11 of 11

13th February 2017, 23:42 #1
 Join Date
 Aug 2016
 Posts
 52
 Helped
 0 / 0
 Points
 547
 Level
 4
[Moved]: How to simulate DC Nonlinear model?
Hi,
I have an equation that describes the linearity of my amplifier. and I want to make a plot based on the equation. How could I do that in ADS?
this the equation I have vo=a1+a2vi+a3vi^2, and I want to plot vo vs vi...
Please help,
thanks

13th February 2017, 23:42

14th February 2017, 02:29 #2
 Join Date
 Apr 2011
 Location
 Minneapolis, Minnesota, USA
 Posts
 11,756
 Helped
 2307 / 2307
 Points
 47,105
 Level
 53
Re: How to simulate DC Nonlinear model?
Can you create a lissajous figure? It's the natural choice.
Excellent for observing whether your amplifier introduces distortion.

14th February 2017, 16:32 #3
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 1,823
 Helped
 498 / 498
 Points
 12,452
 Level
 26
Re: How to simulate DC Nonlinear model?
It is very easy.
Use SDD(Symbolically Define Device) or VerilogA.
http://edadocs.software.keysight.com...efined+Devices
http://edadocs.software.keysight.com...he+SDD+and+UCM

14th February 2017, 16:32

13th March 2017, 21:38 #4
 Join Date
 Aug 2016
 Posts
 52
 Helped
 0 / 0
 Points
 547
 Level
 4
Re: How to simulate DC Nonlinear model?
Hopefully it's not too late to get back to you. Thank you for your help. The SDD example is really helpful.
I tried out the example, but it doesn't work as what I expect. Compression point, OIP2, and OIP3 do not match to my original amplifier.
I have the equations set up as follows.. K1, K2, and K3 are calculated base on gain, OIP2, and OIP3. Do I input anything wrong here?

13th March 2017, 21:38

15th March 2017, 14:28 #5
 Join Date
 Aug 2016
 Posts
 52
 Helped
 0 / 0
 Points
 547
 Level
 4
Nonlinear model of amplifier simulation using SDD
Hi all,
I would like to come up with a DC nonlinear model of an amplifier. I calculated k1, k2, and k3 based on gain, OIP2, and OIP3 of the amp. And now, I need to simulate the output voltage equation vo=k1vi+k2vi^2+k3vi^3. I use SDD2P block to simulate(as shown in the pictures below), but I could not get similar OIP2 and OIP3 values by doing HB simulations. Does anyone know what I've done wrong in the simulation setup?
Thank you so much!

18th March 2017, 11:28 #6
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 1,823
 Helped
 498 / 498
 Points
 12,452
 Level
 26
Re: Nonlinear model of amplifier simulation using SDD
Show me equations for k1, k2 and k3 you use.
http://edadocs.software.keysight.com...pageId=5923594
And you use "vi" in SDD without defining it.Last edited by pancho_hideboo; 18th March 2017 at 11:37.

20th March 2017, 07:08 #7

20th March 2017, 18:17 #8
 Join Date
 Aug 2016
 Posts
 52
 Helped
 0 / 0
 Points
 547
 Level
 4

21st March 2017, 02:57 #9
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 1,823
 Helped
 498 / 498
 Points
 12,452
 Level
 26
Re: Nonlinear model of amplifier simulation using SDD
No.
I request equations for k1, k2 and k3.

21st March 2017, 02:57

21st March 2017, 15:24 #10
 Join Date
 Aug 2016
 Posts
 52
 Helped
 0 / 0
 Points
 547
 Level
 4
Re: Nonlinear model of amplifier simulation using SDD

21st March 2017, 16:22 #11
 Join Date
 Oct 2006
 Location
 Real Homeless
 Posts
 1,823
 Helped
 498 / 498
 Points
 12,452
 Level
 26
Re: Nonlinear model of amplifier simulation using SDD
First, set k2=0.
Can you get reasonable results when k2=0 ?
I think your equations for k2 and k3 are very suspicious.
See http://www.designersguide.org/Model...rfsystems.pdf
There are many definition of IM2.
And IM2 is out of band.
Show me definition of your IM2.Last edited by pancho_hideboo; 21st March 2017 at 16:46.
+ Post New Thread
Please login