Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to assign a dimension for the radiation box for a dipole in hfss / any relation with lambd?

Status
Not open for further replies.
H

harishr

Newbie level 4
Joined
Feb 20, 2017
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
44
how to assign dimention for radiation box for dipole in hfss /any relation with lambd

i had design the dipole at 2.4GhZ, now prob is at the end of the design need to draw radiation box . what are the rules for drawing the dimentions of radiation box? is there any rules/equations / any relation with respect to lambda?
 

Re: how to assign dimention for radiation box for dipole in hfss /any relation with l

Typically, you want the edges of the box to be at least lambda/4 away from the closest radiating surface.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top