+ Post New Thread
Results 1 to 5 of 5
  1. #1
    Member level 1
    Points: 793, Level: 6
    abhishek.2138's Avatar
    Join Date
    Dec 2013
    Posts
    33
    Helped
    0 / 0
    Points
    793
    Level
    6

    Snubber / clamp capacitor

    which type of capacitor used for snubber in flyback smps of around 20watts ?

    •   Alt27th February 2017, 10:38

      advertising

        
       

  2. #2
    Super Moderator
    Points: 43,866, Level: 51
    Awards:
    Most Frequent Poster

    Join Date
    Apr 2014
    Posts
    8,977
    Helped
    2169 / 2169
    Points
    43,866
    Level
    51

    Re: Snubber / clamp capacitor

    Hi,

    no voltage, no current?
    No circuit?

    Klaus



    •   Alt27th February 2017, 19:45

      advertising

        
       

  3. #3
    Member level 1
    Points: 793, Level: 6
    abhishek.2138's Avatar
    Join Date
    Dec 2013
    Posts
    33
    Helped
    0 / 0
    Points
    793
    Level
    6

    Re: Snubber / clamp capacitor

    Input - 230Vac (15% tolerance), 50 Hz
    Output- 24V, 0.5A
    Device used- NCP1014AP06 (in built MOSFET of 700V & controller 65 KHz freq.)

    want to know ceramic or film capacitor to be used for clamp & for snubber.

    Here I am concerned with clamp now (for NCP1014AP06) but also want to know capacitor type for snubber.

    Flyback topology used with no auxilary winding...( No aux winding needed for NCP1014 upto 14W)

    Datasheet---

    NCP1010-D.PDF
    Last edited by abhishek.2138; 28th February 2017 at 03:05.



    •   Alt28th February 2017, 02:56

      advertising

        
       

  4. #4
    Junior Member level 3
    Points: 324, Level: 3

    Join Date
    Aug 2016
    Location
    India
    Posts
    30
    Helped
    7 / 7
    Points
    324
    Level
    3

    Re: Snubber / clamp capacitor

    You can use a ceramic capacitor which can tolerate upto few 100s of volts.

    Thanks



  5. #5
    Advanced Member level 5
    Points: 24,978, Level: 38
    Achievements:
    7 years registered

    Join Date
    Sep 2008
    Location
    cambridge
    Posts
    5,266
    Helped
    406 / 406
    Points
    24,978
    Level
    38

    Re: Snubber / clamp capacitor

    ceramic yes, as in smd is less inductive than most film types.....and smaller......if you shovel your spec into power.com's free PI Expert software it will calculate the entire circuit and bom for you...and tell you the snubber cap part number etc



--[[ ]]--