Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Disk Software for Tektronix PRISM 3001 boot diskette

Status
Not open for further replies.

polegllass

Newbie level 2
Joined
Feb 17, 2017
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
Hi,

I`ve purchased the Tektronix analyzer but I didn`t know the boot diskette is nessesary. I need to make the image of 720 kB boot dikette.
Can enybody help me?
Many thanks,
Pawel
 

If you're lucky there is a utility that automatically formats a 720k floppy, then writes the boot programs to it.

Or else you'll need to format a 720k floppy with a complicated DOS command in a DOS window. (The command contains number of tracks and sectors.) Then you write system programs to it. This creates a startup diskette. Then add the Tektronix program.
 

The problem is because I have no software for it.
 

Visit the Tektronix website, or a Tektronix user forum. They may have specific information.

You need to find out whether you need a computer boot disk, or a boot disk specifically designed for the Tektronix unit.
 

Hi,

I`ve purchased the Tektronix analyzer but I didn`t know the boot diskette is nessesary. I need to make the image of 720 kB boot dikette.
Can enybody help me?
Many thanks,
Pawel

Hi Pawel,

this is what you are looking for.

qPwQ4Zv.jpg


also you will likely need other software and manuals for it

look at my imgur links as well

this should give you an idea of what is broadly available, based on what acquision modules are fitted to your 3001
https://imgur.com/a/cQm0m

in regards to does your 3001 have a hard drive read the posts on Tektronix Logic Analyzer Forum as follows

https://forum.tek.com/viewforum.php?f=570
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top