Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with Altium (some footprints remain off-grid)

Status
Not open for further replies.
kappa_am

kappa_am

Full Member level 6
Joined
Jul 16, 2012
Messages
331
Helped
19
Reputation
38
Reaction score
19
Trophy points
1,298
Location
Vancouver
Activity points
3,859
Hi all,
I have a problem with Altium DXP. I created a PCB project. When I built PCB first time, everything was perfect. Then, I changed the schematics, when I updated the PCB file some component remain unconnected ( not newly added, the components that were in schematic before).
I added new PCB file, in the new file everything is ok. How can I solve this problem? because I have worked a lot on previous PCB file and do not want to loose it.

Regards,
 

Did you try to reset Unique Id of the problematic components?
 
It could be a component ID mismatch. If that's the case, the PCB on the component wouldn't be seen as the same on the schematic.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top