Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS and mixed-mode s-parameters

Status
Not open for further replies.
N

ngox

Member level 2
Joined
Aug 4, 2011
Messages
50
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,718
Hi, is there a way for HFSS to directly plot mixed-mode s-parameters? If not, does anyone have a good guide, or equation, for a generalized conversion between single ended and mixed mode results? I'm currently simulating an 8-port network, so equations from 4-port network conversion (which are everywhere on the internet) are not so useful. Any help would be appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top