Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

minimum reflection match or maximum power transfer match

Status
Not open for further replies.

AmirMohammad

Member level 2
Joined
Apr 7, 2007
Messages
48
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
1,601
Between two approaches for impedance matching (minimum reflection or maximum power tranfser) which of them can result in more gain in an antenna?
 

Theorecticaly you should end up at the same tuning. It all depends on what kit you have to hand. I think the most sensitive way is to minimise the reflected power, but that depends on your driving power. In the end if you transmit 99 or 98% of your power it makes no difference at the receiving end. However a doubling of the reflected power could easily damage a high power transmitter.
Frank
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top