kaka919
Newbie level 5
Guys, I'm trying to interface gps module mt3333 with 8051 but unsuccessful til now. My gps module is not showing me proper values in hyper terminal, i.e. it is not showing me latitude or longitude. Also in $GPRMC statement it is showing a letter 'V' which stands for data not valid. So can anyone help me with this so that it shows me latitude and longitude values. Below is what I get in hyperterminal.
Code:
PMTK011,MTKGPS*08
$PMTK010,001*2E
$GPGGA,235944.037,,,,,0,0,,,M,,M,,*41
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,235944.037,V,,,,,0.00,0.00,050180,,,N*48
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,235945.036,,,,,0,0,,,M,,M,,*41
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,235945.036,V,,,,,0.00,0.00,050180,,,N*48
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,235946.036,,,,,0,0,,,M,,M,,*42
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,235946.036,V,,,,,0.00,0.00,050180,,,N*4B
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,235947.036,,,,,0,0,,,M,,M
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPRMC,235947.036,V,,,,,0.00,0.00,050180,,,N*4A
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
$GPGGA,235948.036,,,,,0,0,,,M,,M,,*4C
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,1,1,00*79
$GPRMC,235948.036,V,,,,,0.00,0.00,050180,,,N*45
$GPVTG,0.00,T,,M,0.00,N,0.00,K,N*32
Last edited by a moderator:
