Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[General] 2x16 LCD module - life of the LCD module

Status
Not open for further replies.
ThirunavukkarasuThoondi

ThirunavukkarasuThoondi

Member level 1
Joined
Nov 19, 2015
Messages
33
Helped
2
Reputation
4
Reaction score
2
Trophy points
8
Location
Chennai, Tamil Nadu, India
Activity points
227
we are using 2x16 LCD module in our electronic alarm system. some of the LCD module (10%) become out of order within short period.(2- 3 months). is there any suggestion to prevent the LCD modules. we are purchasing the imported LCD module which are available in the market.
 

Hi,

Many years ag we also had trouble with failing LCDs.

We found out, that it is caused by high voltage spikes coming from a signal line.

Besides of overvoltage (spikes) on signal lines or power supply, or even the metal case during normal operation,
such failures are typical for ESD problems during production.

Please check that the whole process:
* the parcel you get from your distributor
* stock receiving area
* quality inspection
* stock packaging
* assembling area
* and all other areas
Are true ESD protected

Klaus
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top