Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to know which bsim model is used by cadence

Status
Not open for further replies.
P

pekachoo007

Member level 2
Joined
Jul 29, 2013
Messages
45
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
284
how to know which bsim model has been used by cadence
 

The LEVEL parameter (in the model file) determines this.
 
how to access this model file in cadence environment
 

pekachoo007 said:
how to know which bsim model has been used by cadence
Click to expand...
What do you mean by "cadence" ?
If you use Cadence Spectre, see simulation log file, e.g. "spectre.out".
You can find "Circuit Inventory", there you can see used device model counts.
 
pekachoo007 said:
What is this??
Click to expand...
There is no tool which name is Cadence.
Even if you use Cadence ADE, you can launch many vendor's simulators, e.g. hspice, eldo, GoldenGate, .etc.

Always describe correct tool's name and vendor's name which you use as tool or simulator.

You can find out "Circuit Inventory" in log file of any vendor's simulator.
 
Last edited:
pancho_hideboo said:
There is no tool which name is Cadence.
Even if you use Cadence ADE, you can launch many vendor's simulators, e.g. hspice, eldo, GoldenGate, .etc.

Always describe correct tool's name and vendor's name which you use as tool or simulator.

You can find out "Circuit Inventory" in log file of any vendor's simulator.
Click to expand...

how to access this log file
 

Last edited:

Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top