Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SIM900A-how to check sim900a modem ?

Status
Not open for further replies.

N.Karthick

Junior Member level 2
Joined
Sep 19, 2014
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Tirupur, India
Activity points
166
1.how to test a GSM module.

2.before connecting hyper terminal.

3. because send and receive problem in hyperterminal ? on loop connection it works properly but in modem?
 

Your question is not clear about what you want to achieve.

I would recommend power up your module as described in the user manual and later try to communicate via UART from PC terminal. You can use teraterm for that.
 

1.how to test a GSM module.

2.before connecting hyper terminal.

3. because send and receive problem in hyperterminal ? on loop connection it works properly but in modem?

1(Ans) You can test your GSM with hyper terminal or with stand alone controller with AT commands.

2and 3(Ans) I think its easy to test the GSM module with hyper terminal with just only serial cable.What kind of send receive problem you having?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top