Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

walkie talkie interference

Status
Not open for further replies.
sundar-edaboard

sundar-edaboard

Junior Member level 1
Joined
Sep 5, 2013
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Bahrain
Activity points
131
Hi,

I am using dimmer module, which controls 4 x 5A output. Working with the processor of Atmega16A. Communication between interface(switches) and the dimmer module is 250,000bps baudrate RS485 protocol.

When i bring the walkie-talkie nearby the dimmer module the module's display goes OFF and re-starts again.

What is the reason behind that? How to rectify this problem?

Is it because of the communication frequency problem or EMI generation?

Thanks in advance.
 

The RF from your walkie talkie is just getting inside your processor module and interferring with its action. To over come this sort of problem its best to put the processor in a metal box and filter every line that runs from inside the box to the outside world.
Frank
 
Thanks to all.
I will protect the processor and SMPS supply by shielding.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top