Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] S2P data from HFSS to ADS mismatch

Status
Not open for further replies.
L

Lathas

Advanced Member level 4
Joined
Oct 16, 2012
Messages
118
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,044
I have created an s2p file from HFSS15 using solution renormalize to 50ohm. The header of the s2p is " # GHZ S DB R 50.000000". I have created a ckt in ads with 2 port s-parameter block connected to 50ohm terminations on both ends to plot/ensure the s-parameter in ADS 2009. When I plot db of s(1,1) in ads, it doesn't match with the values in the s2p file. What could be the problem?
 

It was a mistake, that I was using different points to plot the data and the narrow band got missed in the process...Once the same points were used to plot, data matched.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top