Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[51] 74LS595 Error in Simulation Proteus

Status
Not open for further replies.

tatbocmui

Newbie level 3
Joined
Oct 11, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
27
I became familiar with the 74LS595, i want to make 1 2 3 on the OUTPUT of each of three 74LS595, but it always show 0 on three 74LS595. This is my simulation and code. Help me, please!!!

View attachment 74LS595.rar
 

You want to display 1, 2 and 3 on 3 SSDs ? You have to clock in 24 bits of data and then give one more pulse to ST_CP store data on o/ps of 595.
 

I think, i do the same like you talk, but the simulation in proteus is not correct
 

Hi;
Just one comment:
Both 595 clock inputs (SHCP and STCP) require positive pulses (and working on the raising ie 0-1 edge).
For example (to storing) your instructions should be replaced:

IE74LS595_STCP = 1; //the raising edge
IE74LS595_STCP = 0;

Use the same order also for SHCP.

Sorry but I do not have such compiler to try it.
 

Do you want to drive the enable pins of SSDs using HC595 ?
 

Hi;
Just one comment:
Both 595 clock inputs (SHCP and STCP) require positive pulses (and working on the raising ie 0-1 edge).
For example (to storing) your instructions should be replaced:

IE74LS595_STCP = 1; //the raising edge
IE74LS595_STCP = 0;

Use the same order also for SHCP.

Sorry but I do not have such compiler to try it.

I also use the same as SHCP but it does not run
 

Try this i make some change in your code i think this helps you
 

Attachments

  • 74LS595-Mo-rong - Copy.rar
    73.1 KB · Views: 87

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top