Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] how can i read from memory

Status
Not open for further replies.
M

Mina Magdy

Member level 3
Joined
Jun 19, 2012
Messages
67
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,288
Location
Cairo, Egypt
Activity points
1,742
hi
can i read from the memory after the positive edge clock ?
i mean set the address after clock edge and having the o/p after normal read delay , i answer cause i found on SRam architecture sense amplifier which depend on clock during read and write ,and on other hand i can read after clock on xilinx memory.


thanks
 

can i read from the memory after the positive edge clock ? i mean set the address after clock edge and having the o/p after normal read delay
Click to expand...
If the memory has a synchronous output - then it will be there one clock after the address and read enable (if a read enabled signal is required) are asserted.

i answer cause i found on SRam architecture sense amplifier which depend on clock during read and write ,and on other hand i can read after clock on xilinx memory.
Click to expand...
I have zero understanding of what you're trying to say in this sentence.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top