Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

cannot open macro file: system.do

Status
Not open for further replies.
M

mahound

Newbie level 5
Joined
Feb 14, 2012
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,376
Hi
I am a beginer for modelsim. I made a project as microblaze. then I wanted to simulate it.
I run modelsim through this command: make -f system.make sim
Then I run 4steps for simulation. the first step is : do system_setup.do;c
but this step cannot completely run and give an error : # cannot open macro file: system.do
"system" term is name of my project.

please help me
thanks
 

A .do file in modelsim is a run script having a collection of modelsim commands (required to compile,load and run the design). It might also be a set of signals which have to transferred on to the wave window(in which case you have to run it after the simulation is run). This file is missing in your setup.
 

make sure you're in the same directory as system.do
type "pwd" to see current path.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top