Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

use of gates in cells of fpga

Status
Not open for further replies.

priyankadarkunde

Newbie level 3
Joined
Jan 17, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
29
in fpga when gates in one cell are used completely, it switches to other cell and uses gates available in that cell. i want to know when it shows the gate count does it include all gates in that other cell or it includes only used cell in gate count??
 

There are no gates in an FPGA, so there is no gate count. And therefore a cell cannot be full of gates.

An ALUT (altera) or Slice(Xilinx) contains and LUT and a register (and some other little bits). But theres not gates. They are created by setting the LUT to a specific table.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top