Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Moved] 12 to 9 bits ADC Bit masking...

Status
Not open for further replies.
S

steven2410

Newbie level 3
Joined
May 16, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
31
Untitled.png
Microcontroller: MSP430 (https://www.glitovsky.com/Tutorialv0_3.pdf)
I'M NEW TO MICROCONTROLLER AND STUCK ON THIS PROBLEM FOR AWHILE. Along the way, i know how to bit masking using OR/AND operation. But i have no idea how to convert 12 bit ADC to 9 bit ADC through masking ( as the questions asked) and how masking help to remove the noise as stated.
Appreciate any guidance or learning sources.
 

hello,

if you have a 12bit value stored into an 16bits integer ( or 2 bytes collapsed)
and want to transform it into 9 bits value ... allways inside an 16 bits integer !

you have to do a register right shifts
like
Value9bit= Value12bits >> 3 ;
= XXXX 1011 0100 1000 -> XXXX XXX1 0110 1001
but you only loose LSB bits...

and With a AND mask you loose MSB bit
Value9bits = Value16bits & b'0000 0001 1111 1111'
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top