Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connection of PC to Zigbee Module using a serial cable

Status
Not open for further replies.
S

SINDHURI

Member level 2
Joined
Dec 13, 2012
Messages
46
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,662
Good Evening one and all,

I want to connect the USB Port of PC to Zigbee module as shown in the attached photos by using a BF810 USB to Serial adapter cable.

USB TO SERIAL CONVERTER CABLE.JPG

ZIGBEE MODULE.JPG

The USB of the cable is connected to the USB port of the PC. Aslo tell is there any MAX 232 IC present in the converter that is connected to the Zigbee Module. Please help me.

Thanks in Advance.
 

Whats the main question ? it seems like you have answered the question ureself.
MAX232 chip is an RS232 to TTL level converter (connect it to a micro contoller via its uart interface(rx/tx pins ). So no the converter has an IC ( example FTDI's FT232R may be check datasheet ) that converts serial to usb protocol.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top