Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Leaving target processor paused nios ii multiprocessor application

Status
Not open for further replies.

khama

Newbie level 2
Joined
Feb 21, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,295
Hi,
I m using the multiprocessor tutorial, to have a MPSOC application, but when i finish all steps and running the nios application I have this message in the terminal,

Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Processor is already paused Reading System ID at address 0x0960A190: verified Initializing CPU cache (if present) OK Downloading 07000000 ( 0%) Downloaded 61KB in 1.0s (61.0KB/s) Verifying 07000000 ( 0%) Verified OK Leaving target processor paused

I have done this work many times but with the some message, it don't display any thing in the console , please can any one help me, I m using quartus 9.0 and a de2_70 board thinks very much.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top