Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

packet loss in SFP+ channel..

Status
Not open for further replies.

princee

Newbie level 3
Joined
Nov 26, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
Hi everyone,


I am using 2 sfp+(10G) in my board. For testing it in 10G mode I have connect these two sfp+ port with 2 xfp port on tester side. One port is working fine in terms of tx and rx throughput (i.e. transmit and receive throughput is same) But in other channel(sfp+) iI am getting very low receive throughput (i.e very high packet loss approx 90-95% loss).

Can any one tell me what can be the possible reason behind it??

I have checked it with 4-5 different card. All card have same issue. Some card are working good with channel 0 and channel 1 is faulty and some have correct channel 1 and faulty channel 0. Only one channel is working fine at a time and other is having a high traffic loss.

I have checked schematic and design , every thing is correct.

Please help me finding the possible reason of it.

thanks...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top