electrodarkness
Member level 1
- Joined
- May 2, 2010
- Messages
- 39
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- Ganesti, Transylvania, Romania
- Activity points
- 1,649
I would like to build a TCP-IP development board with pic micro controller. Since I'm new to servers and rj connectors, I've been looking at a schematic as a reference where the connector was rjld-043tc1 connector. The problem is I have an rj45 trafo-l connector from Amphenol. The circuit is slightly different in these two connectors. Could I replace it or should search for rjld-043tc1?
The first connector can be found at: https://www.olimex.com/dev/images/PIC/PIC-MINI-WEB-REV-C-SCH.gif
The last connector can be found at: https://www.tme.eu/en/details/rj45-trafo-l/rj-connectors/amphenol/lmj1998824110dl1t39j/#
Any help would be appreciated.
The first connector can be found at: https://www.olimex.com/dev/images/PIC/PIC-MINI-WEB-REV-C-SCH.gif
The last connector can be found at: https://www.tme.eu/en/details/rj45-trafo-l/rj-connectors/amphenol/lmj1998824110dl1t39j/#
Any help would be appreciated.