Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

identifying SMD capacitors?

Status
Not open for further replies.
inductor

inductor

Junior Member level 2
Joined
Apr 7, 2012
Messages
24
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,422
Hi
When i was fixing my radio I had to replace SMD capacitor with a ceramic disk capacitor.

The SMD capacitor was dark brown, some others were light brown, some were white.
Is there a color code for their value?
:?:
 

Unfortunately not. Also, be aware that leaded capacitors are likely to have much higher inductance than SMD types; that is sometimes of importance.
 
Ok thanks.
Capacitor was near the front end of receiver, I thot a 103 would work didnt have one, tried a 104 it worked but reception was a bit weak, so tried 102 and reception was normal.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top