Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

interfacing skm53 gps module to pic 16f877a

Status
Not open for further replies.
MahmoudHassan

MahmoudHassan

Full Member level 6
Joined
Oct 4, 2010
Messages
349
Helped
44
Reputation
90
Reaction score
40
Trophy points
1,328
Activity points
3,913
hi all, how to connect skm53 gps module to pic 16f877a?as it is known that the output of GPS module output is serial connection at 2.85v ttl ,please anybody help me
GPS module's data sheet is in this link

**broken link removed**
thanxxxxxxxx a lot
 

brother,just connect the ground pin to the common grnd then connect the Tx of gps to the T1in of max232 then connect the T1out to ur mcu Rx pin then do the programming accordingly
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top