+ Post New Thread
Results 1 to 6 of 6

21st June 2011, 04:02 #1
 Join Date
 Dec 2009
 Posts
 70
 Helped
 1 / 1
 Points
 1,669
 Level
 9
A question about the third order distortion of cascaded outputs? Any equations?
I am designing a receiver. In a traditional way, I use two mixers and three ampllifiers. The OIP3 of the amplifiers is +27dBm, and IIP3 of the mixers is about 18dBm. The simple structure of the system is something like the mixer>amplifier>filter>mixer>amplifier>amplifier>filter. The level of the mixers is about 30dBm. So the third order output of the mixer is about (18dBm(30dBm))*2=96dBc. As the three amplifiers are of the same gain about +15dB and the mixers are of the same conversion loss about 8dB, the third output of the second amplifier should be (+27dBm(30dBm8dB+15dB))*2=100dBc. In theory, the third output of the third amplifier should be (+27dBm(30dBm8dB+15dB+15dB))=70dBc. Am I right in theory? I just make the calculation of each individual components and I haven't taken the cascaded effect into account. Would anyone like to point me out where I am not right and tell me how to modify my calculations? In which case we should care about the cascaded effect? Is there some equation like the noise figure one? Any reply is appreciated.

21st June 2011, 04:02

21st June 2011, 23:13 #2
 Join Date
 Jul 2010
 Location
 Beijing
 Posts
 1,927
 Helped
 373 / 373
 Points
 10,476
 Level
 24
Re: A question about the third order distortion of cascaded outputs? Any equations?
There are several free software can calculate the cascade system specifications, you should use software to do it. Such as syscal etc.

21st June 2011, 23:13

22nd June 2011, 10:11 #3
 Join Date
 Oct 2001
 Posts
 4,628
 Helped
 1353 / 1353
 Points
 32,330
 Level
 43
Re: A question about the third order distortion of cascaded outputs? Any equations?
The applet below is for 5 stages, but can give you an idea what is going on.
CASCADE08.swf
For more complex analysis you can use the AppCAD from Agilent:
AppCAD
1 members found this post helpful.

22nd June 2011, 10:11

22nd June 2011, 23:20 #4
 Join Date
 Nov 2010
 Location
 Copenhagen, Denmark
 Posts
 32
 Helped
 2 / 2
 Points
 1,345
 Level
 8
Re: A question about the third order distortion of cascaded outputs? Any equations?
Use the software as described above. Your calculations are way wrong. IP3 is a theoretical point. You will never have your amplifier working in that region because of saturation.

23rd June 2011, 08:25 #5
 Join Date
 Dec 2009
 Posts
 70
 Helped
 1 / 1
 Points
 1,669
 Level
 9
Re: A question about the third order distortion of cascaded outputs? Any equations?
Hey, friends! I use the OIP3 just for the calculations. I don't make the amplifiers work in the IIP3, although I have done it before. The chaos in my spectrum is hard to describe.

23rd June 2011, 08:25

28th September 2011, 14:32 #6
 Join Date
 Aug 2010
 Location
 Chengdu
 Posts
 18
 Helped
 13 / 13
 Points
 1,370
 Level
 8
 Blog Entries
 1
Re: A question about the third order distortion of cascaded outputs? Any equations?
The Cascade calculation formula of Gain/NF/OP1dB/OIP3 are:
You can use Cascade or the tool I developed to calculate cascade specifacations.
+ Post New Thread
Please login