Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Port definition for lambda/2 dipole simulation using CST

Status
Not open for further replies.
M

Mustafa_Engineer

Full Member level 3
Joined
Dec 5, 2007
Messages
161
Helped
23
Reputation
46
Reaction score
13
Trophy points
1,298
Activity points
2,123
Hi,

I would like to simulate lambda/2 dipole in free space using CST.

I have checked the example in the help files of CST. I have question regarding the port definition

If the feed gap is only 0.25 mm, so the cpoints should be:

x1=0 y1=0 z1=0.125
x2=0 y=0 z=-0.125

why he defined two values for X1 and X2 ????


please help?
 

Re: CST_port_dipole

I checked the model. If you look at History list, port is defined as follows:

With DiscretePort
.Reset
.PortNumber "1"
.Type "SParameter"
.Impedance "65"
.Voltage "1.0"
.Current "1.0"
.Point1 "0", "0", "-d/2"
.Point2 "0", "0", "d/2"
.UsePickedPoints "True"
.LocalCoordinates "False"
.Monitor "True"
.Create
End With

which is as you expected. Don't get fooled by the numbers shown (looks like a bug). It must be due to defining ports by picking face centers.
 

CST_port_dipole

Since it is disabled and thus do not represent the actual location. Best way of defining this type of port is to pick both the faces and then use the port.
 

CST_port_dipole

Dear all
I have a problem I don't know why stop band creates on high frequency range? another things that sizes are produce large stop band for good SRRs?
what is the meaning of sizes?
is it ring sizes or not?

Added after 1 minutes:

A good stop band is needed for sizes are large or not?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top