Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

This is a working RS232.... ICD2 !!!!

Status
Not open for further replies.

crazyduck

Full Member level 4
Joined
Sep 3, 2001
Messages
214
Helped
13
Reputation
26
Reaction score
6
Trophy points
1,298
Location
France
Activity points
2,007
icd0082

Hi everybody,
I'm happy to say : I've make it and it works fine !!!

It's only the version with RS232 interface, the USB comes later... perhaps.

Enjoy and thanks to MCU!!!

CD :D
 

icd0152

Looks good...

Do we know exactly which part the MCP41xxx is? 10K, 50K, 100K?

Thanks for this,
FoxyRick.
 

icd2 rs232

Hi,
Ooops sorry for the missing part number reference. This is a 10k potentiometer.

Have fun !!!

CD :D
 

serial icd2

Hi Crazyduck,
could you upload the project files in original ( not pdf) format - a shematic and a pcb.
Thanks in advance.

Best regards
 

ccs rs232

hi crazy duck
nice job could you upload it in protel format as other stuff i seen you do is done in prottel

cheers

spnare
 

mplab icd2 keeps looking for com2

FoxyRick said:
Looks good...

Do we know exactly which part the MCP41xxx is? 10K, 50K, 100K?

Thanks for this,
FoxyRick.

hi all
anyone knows an easiest-part-to-find instead of this Mchip 10K digital pot ?
 

74ahc126

Hi,
Digital potentiometer can be requested freely on the microchip website.

CD:D
 

pic12f629 icd0069: debug: unable to run target

Hi Crazyduck,
Could you upload the project pcb files ( not pdf) ?
Thanks in advance.
 

si4435 replaced

It's done look on the board you'll find files in protel format.
CD:!
 

home made icd2

You can use common trimmer instead of digital pot.
It is switched on the same value, still.

pool_77
 

16f877 icd2

CD
there is only the schematic file in the rar folder
could you upload the pcb lay out for us all

cheers
snaper
 

16f876a max232

Hi,
This the pcb file in p*r*o*t*e*l d*x*p 2004 format.
CD:)
 

    V

    Points: 2
    Helpful Answer Positive Rating
register difference between 877 and 877a wrt pic

ver good job CD u must have worked very hard

cheers

snpaer :))))
 

invalid target mode for requested operation pic24

Hi. CrazyDuck.
I am Going to Make ICD2 to serial type.

I have two schematic.
Original shematic use PIC16F877A, the other use PIC16F877A

But I don't know that Bootloader(MPLAP Original HEX) is operated different device(PIC16F877, PIC16F877A)

I would like to use PIC16F877A in ICD2.

Could you explain the question. Help me.
 

update icd2

Hi All,

Does this firmware also include USB connection? Thank you.

Regards
 

pic16f877 what does icd=true mean

Hi All,

Sorry, I miss out another question. Does this firmware support the firmware updates given from MPLAB? Please advice. Thank you.

Regards
 

disable release from reset with icd2

asara1 said:
Hi. CrazyDuck.
I am Going to Make ICD2 to serial type.

I have two schematic.
Original shematic use PIC16F877A, the other use PIC16F877A

But I don't know that Bootloader(MPLAP Original HEX) is operated different device(PIC16F877, PIC16F877A)

I would like to use PIC16F877A in ICD2.

Could you explain the question. Help me.

To use a 16F877A, the bootloader needs to be modified otherwise the Flash programming will fail when downloading new firmware. The attached file is modified to disable Flash write verify and should work fine with firmware updates.
 
max232+icsp+16f876a

crazyduck said:
It's done look on the board you'll find files in P*otel format.
CD:!
anyone can extract BOM from the p*r*o*t*e*l file ?
thanks
 

icdwarn0038

Zaphod42 said:
asara1 said:
I have two schematic.
Original shematic use PIC16F877A, the other use PIC16F877A

To use a 16F877A, ....
euhhh always 16F877A
i try to understand ???
the original hex file provided by CrayzyDuck is for a 16F877 (NOT a 16F877A) even if its written 16F877A in the PDF file, is it the real situation ?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top