Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Gaisler LEON3 and Xilinx Spartan6

Status
Not open for further replies.
3

3Deye

Full Member level 2
Joined
Oct 7, 2009
Messages
125
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Location
EG
Activity points
2,159
Hi,

Will the LEON3 fit the Spartan6 XC6SLX16 FPGA ?

Spartan 6 specs:
https://www.xilinx.com/publications/prod_mktg/Spartan6_Product_Table.pdf

I am thinking of implementing a quad-core LEON3 , and I am designing my own PCB, I could use two spartan6 chips each containing a dual-core configuration, will it be a good idea ? or should I use one chip for each core ?!

Any tips about the system design are much appreciated.

Added after 5 minutes:

By the way, I do not have the chips yet, so feel free to suggest better alternatives.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top