Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The IMEI is a number programmed by the manufacturer. If the modem doesn't have an EMEI I suspect there is a problem with the unit. It's unlikely you'll find any software to set it, and if you did it would be manufacturer specific.
The EMEI consist of 2 fields. The first field identifies the manufacturer and the second field is a serial number - it's much like the MAC address on an Ethernet board.
IMEI number is embeded into module when production. Most modules can change their IMEI number. But there is one type new module which can use AT command to change modules IMEI number.
IMEI number is embeded into module when production. Most modules can change their IMEI number. But there is one type new module which can use AT command to change modules IMEI number.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
