Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help with 13.56mhz long range RFID READER!!!

Status
Not open for further replies.

hylinuxer

Newbie level 6
Joined
Mar 22, 2008
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,416
rfid long range reader problems

hi all,i'm trying to design a long range reader operating in 13.56Mhz ,and have a external PA,i'm sure that it's no problem for transmit link ,and the wave are all the same with the referrence document,but it can't read card at all,and i also change various antenna to void carry wave saturation,but no effect,i guess receiver link have problem but don't konw how to do it,can anybody help me ?thank you !or you have different advice about it ?
 

long range 13.56mhz

You don't provide much information at all.

- involved RFID standard?
- utilized reader chip?
- did you measure the field strength at the card's location with a test coil? (A test coil is basically an oscilloscope probe with a wire loop of known area)
- did you see any load modulation (card response) with the test coil?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top