Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Program AT89C51 using serial port

Status
Not open for further replies.
I

imaginationbeyond

Newbie level 1
Joined
Feb 19, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
at89c51 how to program

Can we program AT89C51 microcontroller through serial port using max232.
If yes than what is the software required for it??

I m in trouble....
Plz reply....
 

at89c51 serial programmer

Hi,
No, 89C51 requires a parallel programmer, it can not be programmed through serial port. Since you are starting your design, may be you should use 89S51/52 for which you can get cheap circuits and Software for In-System Programming from Net.

With regards,
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top