davorin
Advanced Member level 3
- Joined
- Jun 7, 2003
- Messages
- 901
- Helped
- 11
- Reputation
- 22
- Reaction score
- 4
- Trophy points
- 1,298
- Location
- Switzerland
- Activity points
- 7,349
Good evening (o;
Can someone recommend an easy to use and cheap FPGA to be used
as a logic analyzer with on-chip RAM for capturing data? Should at
least go up to 150/250MHz sample rate (or maybe two devices
capturing at 180 degree phase for double the rate).
The final design is an add-on board for older compact Mac's and the
waveforms are displayed on the built-in monitor (sort of cheap
LeCroy scope ;o).
Also the design software should be freely available (like Altera/ISE webpack etc.).
Can someone recommend an easy to use and cheap FPGA to be used
as a logic analyzer with on-chip RAM for capturing data? Should at
least go up to 150/250MHz sample rate (or maybe two devices
capturing at 180 degree phase for double the rate).
The final design is an add-on board for older compact Mac's and the
waveforms are displayed on the built-in monitor (sort of cheap
LeCroy scope ;o).
Also the design software should be freely available (like Altera/ISE webpack etc.).