Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design of Counters using JK flip flops

Status
Not open for further replies.
P

pravardhan

Member level 4
Joined
May 6, 2006
Messages
74
Helped
8
Reputation
16
Reaction score
6
Trophy points
1,288
Location
Bangalore, Karnataka, India
Activity points
1,845
Hi, I want the procedure to Design of Counters using JK flip flops. I have seen question like, some input & output equations will be given & we should provide the state diagram, state table, state equation & logic (circuit) diagram.

I don't know if its a synchronous or asynchronous?

Bye,
PRAVARDHAN
 

this is a bistable multivi brator.


for circuits see this

Added after 27 seconds:

**broken link removed**
 

pravardhan,...

What kind of counters (BCD, binary, Decimal, up-down,...)?
All can be designed using state diagrams and K-Map.
I have a lot of designes, just name the counter and I'll provide you with design.
 

Try this:
 

Ok, the question is like this:

A sequential circuit has two flip flops (A and B), two inputs (x and y) and an output z. The flip flop functions and the circuit output functions are as follows:

JA = xB+yB' KA = xy'B'
JB = xA' KB = xy'+A
z = xyA+x'y'B

Obtain:

a) logic diagram
b) state table
c) state diagram
d) state equations


The question is taken from the Book:
Digital logic and computer design by Morris Mano.

The page number is 254 & question number is 6-13.
The partial answer is given in page no. 597

But, i couldn't get how he formed the table?

Thanks in advance,
PRAVARDHAN
 

I'm sorry, but.. What are the (x and y)? The inputs of what?
The two Flip_Flops have (JA,KA,QA,Q'A,JB,KB,QB,Q'B) what are the (x and y)?
 

Hi seadolphine,

Um.. There will be some gates between the Flip-Flops and the two inputs - x & y, as well as at the output.

And, the outputs of flip-flops are A,A',B & B' and the inputs are JA,KA,JB & KB.

Bye,
PRAVARDHAN
 

seadolphine2000 said:
pravardhan,...

What kind of counters (BCD, binary, Decimal, up-down,...)?
All can be designed using state diagrams and K-Map.
I have a lot of designes, just name the counter and I'll provide you with design.
Click to expand...

hi seadolphine,
can you provide me a design of counter up and down 0-99/99-0 ???
:D
 

The following link shows you not only how to design the multivibrator circuit but also how to present the work:

**broken link removed**


Let me know if you have more questions.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top