mh123sh
Newbie level 4
I am doing transcient analysis for a differential signal using HPSICE.
Topology is Tx--> Txline--> Rx.
The P and N signals to be started at 0v and 1.2v, but it is observed that the both P and N signals are starting at 800mV.
Please help me to resolve this problem.
Thanks in advance
Topology is Tx--> Txline--> Rx.
The P and N signals to be started at 0v and 1.2v, but it is observed that the both P and N signals are starting at 800mV.
Please help me to resolve this problem.
Thanks in advance