+ Post New Thread
Results 1 to 16 of 16

25th February 2008, 15:27 #1
 Join Date
 Feb 2008
 Posts
 3
 Helped
 0 / 0
 Points
 869
 Level
 6
vrms formula
can someone give me a link on where i can get the relationship between VRMS and VDC( given rectified signal below) or are the the same ?
hxxp://www.kpsec.freeuk.com/images/dcvary.gif
thank you

25th February 2008, 17:41 #2
 Join Date
 Nov 2007
 Location
 Basque Country
 Posts
 111
 Helped
 25 / 25
 Points
 2,589
 Level
 11
vrms to vdc
I'm not sure if this is what you are looking for, but, Vrms of a signal is the equivalent DC voltage that would dissipate the same energy. For example if the Vrms of a signal is 10 V, and it is connected to a resistor R, that resistor would dissipate the same energy as if we had a 10 V DC source connected to the R load, in stead of the AC source mentioned...
i'm not really sure if i am making myself clear...
2 members found this post helpful.

25th February 2008, 17:41

25th February 2008, 18:58 #3
 Join Date
 Sep 2005
 Posts
 249
 Helped
 19 / 19
 Points
 3,114
 Level
 13
vrms vdc
just multiply your AC voltage to square root of 2 ~ 1.4, it will give you the DC voltage after bridge rectifier.
1 members found this post helpful.

25th February 2008, 22:20 #4
 Join Date
 Nov 2007
 Location
 Basque Country
 Posts
 111
 Helped
 25 / 25
 Points
 2,589
 Level
 11
vrms vs vdc
If what you wanted is how to get the vrms value of that signal, si quite easy. What fala said is just an approximation.
Vrms stands for "root mean square" voltage, this is, what you have to do is calculate the root of the mean value of the square of your signal. In other words, if you have a signal specified by then:
1) Calculate the square power of the signal. We do this in order to avoid negative numbers:
2) Calculate the mean value of this signal. For this, you have to take on account what the mean value is: It's the sum of all the values, divided by the number of values calculated. As the signal is a periodic one, the mean value for one period will be the same as for all the periods, so we just calculate one period for simplicity. Then:
3) And finally we calculate the square root of the above to "normalize" the signal (remember we first squared the signal). So finally the Vrms remains:
Now let's calculate Vrms for the specific case of your signal. As you can see, that rectified signal is like a sine wave squared and rooted (all the negative values made positive), so calculating the Vrms for a sine wave is the same as for your signal. Then let's imagine our wave is , where is the peak value of our signal.
If you look close, once squared the signal, its period is , assuming T was the period for the sine wave. For ease of calculation, instead of integrating in it's better if we integrate in , for simplifying calcula. So the period will be going from 0 to (in stead of ). Then:
Resolving:
Finally:
So, returning back to the explanation, if you have an AC source with a peak voltage connected to a resistor R, the Vrms value would represent the energy that would be dissipated by the resistor would be the same as if you changed the AC source for a DC one of value
What fala says, is not actually the DC component but the peak value of your rectified (not yet filtered) signal.
I hope this clears it a little bit more.
2 members found this post helpful.

25th February 2008, 23:45 #5
 Join Date
 Jul 2002
 Location
 Far out, man!
 Posts
 435
 Helped
 91 / 91
 Points
 6,437
 Level
 19
vdc formula
...and the above is only valid for sinusoidal signals.
If you for instance have a square wave signal, Vrms equals Vpeak.
1 members found this post helpful.

25th February 2008, 23:54 #6
 Join Date
 Sep 2005
 Posts
 249
 Helped
 19 / 19
 Points
 3,114
 Level
 13
vrms to vac
Well, in bridge rectifiers, you usually use a capacitor that charges to the peak value,so...?

25th February 2008, 23:54

26th February 2008, 02:50 #7
 Join Date
 Feb 2008
 Posts
 3
 Helped
 0 / 0
 Points
 869
 Level
 6
vdc and vrms
Originally Posted by halls
Given the rectified signal below, Vrms= 0.707 (Vm/sqrt2)and Vdc= .636Vm (2Vm/pi)
As you've said "Vrms of a signal is the equivalent DC voltage that would dissipate the same energy"
So what does VDC represent? i don't understand....

26th February 2008, 02:50

26th February 2008, 10:38 #8
 Join Date
 Nov 2007
 Location
 Basque Country
 Posts
 111
 Helped
 25 / 25
 Points
 2,589
 Level
 11
vdc to vrms
Originally Posted by XNOX_Rambo
If you apply this equation to the square signal you mentioned, you get that Vrms = Vpeak. But our case of study was the specific case of a sinusoidal, which is the reason i did all that stuff, and why the solution is
Originally Posted by fala
If you charge a capacitor with a constant value, it will start charging until it gets the maximum value, which is that constant voltage. But if what you charge with is an alternating value (like the rectified sinusoidal) you will have a variable charge. If you look close to what happens in the capacitor you will see that in the raising half period of the signal, until it gets to the peak, the capacitor will start charging, getting to its maximum value. But when the signal starts to decrease, voltage in capacitor will also decrease, slower than the signal of course, but decreasing as well.
There's some point where the signal starts increasing again, and encounters a discharging capacitor, which will start charging again. So what in the end you will have is an alternating signal which will be variating from peak value to another value which will be the maximum discharge value allowed by the variable input signal. It's something similar to this (it's not exactly the same case): http://content.answers.com/main/cont.../Reservoir.gif
To this you have to add that there are also ohmic losses and so, signal will be lost too. So, summarizing, that final rectified DC signal won't be the peak value in any case.
Originally Posted by newgirl
Trying to not confuse you, the DC voltage i was talking about was just that from the definition of Vrms, and may be not the same as the one you are talking about, so take it on account, that i just might have not understood right the VDC you asked for...
Added after 32 minutes:
Last minute discovery!
Originally Posted by newgirl
This is my best guess by the moment :D
1 members found this post helpful.

26th February 2008, 10:49 #9
 Join Date
 Sep 2005
 Posts
 249
 Helped
 19 / 19
 Points
 3,114
 Level
 13
different vdc vrms
Originally Posted by halls
The only scenario that may leads to drop of voltage in rectifier capacitor is when load demand is higher than the capacity of capacitor to maintain constant voltage. In this case simply with increasing rectifier capacitor value problem can be solved.
@Newgirl,
if you want to rectify a low voltage signal and you are concerned about diode drop you have to build an ideal bridge circuit using OpAmp, search google for ideal diode and ideal bridge + opamp you will find plenty of information.

26th February 2008, 14:01 #10
 Join Date
 Jul 2002
 Location
 Far out, man!
 Posts
 435
 Helped
 91 / 91
 Points
 6,437
 Level
 19
vdc vrms
Originally Posted by halls
The special cases  and thus the notion of "crest factor"  is also something that junior engineers should know
so that they don't take incorrect readings on nonsinusoidal signals using nonTrueRMS multimeters:
Crest factor  Wikipedia, the free encyclopedia

26th February 2008, 16:52 #11
 Join Date
 Nov 2007
 Location
 Basque Country
 Posts
 111
 Helped
 25 / 25
 Points
 2,589
 Level
 11
vrms vdc
Originally Posted by fala
If you see a graph of the voltage output after a capacitor in the output stage of a rectifier (alas, the picture i posted above), you will see how a little "negative ramp" appears from max voltage. This happens exactly when the input signal (the one strictly coming out from the rectifier) starts decreasing. As the capacitor was charged at the maximum voltage, when the signal is lower, the capacitor has more voltage than the one it is being applied, thus, it starts discharging.
While the capacitor is discharging, the rectified input (that coming from the output of the bridge rectifier) is decreasing. But then reaches a point where it starts increasing again (look at first picture of the thread). There is a point when the increasing signal reaches the voltage of the capacitor and keeps raising, thus charging again the capacitor, and the procedure repeats again. This is why the capacitor never gets absolutely discharged.
What you are saying about the diode rectifier doesn't have to do directly with the capacitor. You can have a bridge rectifier with no capacitor, and their job will be the same one: change negative cycles of the signal to positive ones, so there are not any negative cycles in the signal (that is what is called rectifying).
Take a look at this page i found: http://www.allaboutcircuits.com/vol_6/chpt_5/6.html

26th February 2008, 19:16 #12
 Join Date
 Sep 2005
 Posts
 249
 Helped
 19 / 19
 Points
 3,114
 Level
 13
vm=vrms
Originally Posted by halls
I also invite other electronic men to judge our posts
1 members found this post helpful.

26th February 2008, 19:16

26th February 2008, 19:40 #13
 Join Date
 Nov 2007
 Location
 Basque Country
 Posts
 111
 Helped
 25 / 25
 Points
 2,589
 Level
 11
vrms = 0.707 vm
Now i think we both are saying the same thing but from different points of view...
Originally Posted by fala
Originally Posted by fala
Originally Posted by fala
Originally Posted by fala
Originally Posted by fala

26th February 2008, 20:42 #14
 Join Date
 Jul 2002
 Location
 Windsor ON Canada
 Posts
 388
 Helped
 84 / 84
 Points
 5,571
 Level
 17
difference between vrms and vdc
Hi newgirl,
Your question did not specify if you have or do not have rezervoir capacitor attached.
With no load attached and rezervoir capacitor attached to full or half wave rectifier, output will equal Vin*√2 which is absolute peak value of Vac input.
If load is attached voltage will vary between pak value and value determined by capacitor size and load current. litle more can be seen here:
http://www.standrews.ac.uk/~www_pa/...rt5/page1.html
If you under Vdc think of average voltage and just want to know difference between RMS and average values of full rectified sinewave voltage then look here:
http://www.opampelectronics.com/tut...de_2_01_03.htm
Full rectified pure sinewave values of Vavg and Vrms would be:
Vpk = √2 *Vrms
Vpk = Vavg*Π/2
so, Vavg=2*√2*Vrms/Π
Rms capable meter will show RMS value always, while average measuring meter will show RMS value only when dealing with pure sinewave or it's rectified version. Average meter is calibrated to show RMS value and because relationship between Vavg and Vrms for sinewave is linear, reading will remain accurate. If waveform is something different than pure sinewave, reading between two meters will shift appart.
This is actually used when measuring ammount of harmonics in electrical power systems. Difference between RMS and average responding ammeters reveals ammount of harmonics present because of nonlinear loads (power supplies that we just talked about for example )
1 members found this post helpful.

27th February 2008, 07:11 #15
 Join Date
 Feb 2008
 Posts
 3
 Helped
 0 / 0
 Points
 869
 Level
 6
vrms vdc square wave
@halls and falla
Thanks! I think i was analyzing it too mathematically. I agree that both of you may saying the same thing from diff points of view... but i understand it now thanks
@Sinisa
Yes i will attach a capacitor and load later on on the circuit... i just want to familiarize myself step by step...
Thanks again everyone!
Added after 6 minutes:
Originally Posted by halls
thanks again halls.. really appreciate it

24th October 2009, 00:24 #16
 Join Date
 Oct 2009
 Location
 Halifax, Canada
 Posts
 1
 Helped
 0 / 0
 Points
 559
 Level
 5
Re: vrms formula
Originally Posted by newgirl
V rms is the effective value of the ac signal. V rms works out to (via the sqr root of the mean of the square of the signal function) = V max (or peak) divided by √2. This is for the whole AC signal. A DC voltage of the same value would dissipate as much power on the load (assume: resistor). I.e. 120Vrms = 120Vdc.
However, if we rectify the sinusoid signal we end up with a DC pulse signal (it's no longer an ac signal, but a DC signal with pulse characteristics) that can be interpreted by Fourier Series as having a DC component and several harmonics. We can separate the two. On one hand we have just a DC value and on the other hand we have a ripple. That ripple when looked at by it self is just another sinusoid... and as we know a sinusoid will have an rms value.
The ripple factor RF = Vripple rms / Vdc, where Vripple rms is the equivalent DC component of the ripple voltage, that we must add to the offset DC amount if we're to have an exact DC quantity and the right amount of power transfered.
P = VI where V = Vdc offset + Vrms (of the Vripple that sits on top of the DC offset).
So we have a big DC signal (Vdc) plus a little more DC from the ripple (V rip rms) and when added together will give you the actual Vrms of the original signal.
So V dc (V average) is about 63.6% or (2/pi) of V peak or V max and,
V rms is about 70.7% or (1/√2) of V peak or V max.
Although we're talking no filters here. These percentage values will change slightly depending on what you connect as a filter.
Cheers
+ Post New Thread
Please login