Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to use *.scs file in cadence spectre simulator

Status
Not open for further replies.
F

fxxjssc

Member level 4
Joined
Jan 6, 2006
Messages
79
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,879
scs file cadence

Dear all,
I run my simulation with spectre of Cadence. One diode i wish
to use is only .scs file and no symbol with it.
You know the simulation flow is usually draw schematic first and
add stimi, then evoke spectre and run simulation. Without symbol, I
have no idea to draw the schematic.
Could any kind man help me ?
Best wishes
fxxjssc
 

.scs file cadence

You can you symbols from library analogLib and fill the model name with proper value. The .scs file you mentioned should be a model file.
 

I have the same problem.
How can I create a model from scs files?
 

rosaeidi said:
How can I create a model from scs files?
Click to expand...
The other way round: You should have a (SPECTRE) model file and copy it to a .scs file.

If you have a SPICE model file, begin it with
Code: 
simulator lang=spice
 

erikl said:
The other way round: You should have a (SPECTRE) model file and copy it to a .scs file.

If you have a SPICE model file, begin it with
Code: 
simulator lang=spice
Click to expand...

where I can find SPECTRE model file ?
I'm using Ubuntu OS to run Cadence.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top