Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Flat Panel Evaluation Platform

Status
Not open for further replies.
H

hcet

Full Member level 5
Joined
Mar 9, 2002
Messages
313
Helped
21
Reputation
28
Reaction score
6
Trophy points
1,298
Activity points
2,094
We successfully hooked up a 24'' LCD TFT to our evaluation platform. Here are some pictures.



ep20k
 

Good job!!!! What are you[planning to do??
 

Good job!!!! What are you[planning to do??
 

Hi Iouri,

I work in a little company which designs in the first place video IP cores for TV and professional video applications. We also offer implementation to schematics and PCB design of our IP cores.
These boards (a motherboard and an add-on card) are our first prototype and strictly video oriented to develop, test, and show IP cores or quickly evaluate a flat panel.
But of course we will also sell these boards.

I thought maybe someone here in this forum might be interested.

ep20k
 

What IP cores for video/TV you can show ?
HOw many flat panels you can support per one board?
What is max resolution per panel?
What type and size of memory are you using?
What other interfaces on the bvoard are avaliable?
Where are you located?
 

Iouri said:
What IP cores for video/TV you can show ?
Click to expand...
HDTV 2D Scaler, Multi Window Display Controller, HDTV Matrix/Dematrix (Colour Space Converter), HDTV/SXGA Mixer Unit (& Blender), HDTV/SDTV Video to Graphics Converter, 2D Motion adaptive Deinterlacer, 3D Noise Reducer
Iouri said:
HOw many flat panels you can support per one board?
Click to expand...
Maximal 3 Panels
Motherboard 1xLVDS & 1x8bit TTL, with add-on card plus 1xLVDS
Iouri said:
What is max resolution per panel?
Click to expand...
UXGA, WUXGA
Iouri said:
What type and size of memory are you using?
Click to expand...
Motherboard: 512Mbit DDR SDRAM@EP2C20, 512Mbit SDRAM@EP2C50
Add-on card: 1024Mbit DDR SDRAM & 18Mbit Sychronous SRAM@XC2VP30
Iouri said:
What other interfaces on the bvoard are avaliable?
Click to expand...
Inputs Motherboard:
HDTV YPbPr, RGB
SDTV YPbPr, RGB, Y/C, CVBS
DVI (1080p/UXGA)
RGB (UXGA)

Outputs Motherboard:
HDTV YPbPr, RGB
SDTV YPbPr, RGB
DVI (1080p/UXGA)
RGB (UXGA)

Additional output with Add-on:
SDTV YPbPr, RGB
Iouri said:
Where are you located?
Click to expand...
Europe
 

There is a 52" and a 4.3" panel from Sharp hooked up to our evaluation platform. We showed it at Embedded World 2008.



We planned to convert the full HD content to show that on the 'tiny' panel. But we ran out of time as you can see. The 4.3er is just showing a test pattern from FPGA. But we are now able to fill both channels from one source :D

The 52" Sharp LCD is amazing and not too expensive. If you buy ≥10 panels each will be under 2k Eur. That would be a nice thing for the living room :D

ep20k
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top