Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to start and master PLC??

Status
Not open for further replies.
abbas1707

abbas1707

Full Member level 4
Joined
May 3, 2007
Messages
216
Helped
20
Reputation
40
Reaction score
8
Trophy points
1,298
Activity points
2,371
how to start plc

hi,
i want to start work on PLC.but i have zero knowledge about it.plz help me and guide me . i want to know where to start ,is there any good book or tutorial that i shud follow???also is there some simulating software available on net for them???
plz plz help

i will be very thankful to u...
 

karnaugh map plc

for start up i can introduce you a good valuable resource:
https://www.mikroe.com/en/books/plcbook/plcbook.htm
this is a free ebook from mikroelektronica. you can use it online or download it from the above link. after reading this you can find more books and tutorials about plc in edaboard or web.(just search) . the plc teached in this book is omron but the lessons are extendable to all plcs.
:D
 

Take a low cost PLC. Learn Ladder language and make some example. The problem is that you need a PLC and maybe they are not cheap.
 

first read
1. industrial instrumentation
2. basic knowledge of programming and digital electronics (gate level logics, karnaugh map, and physical interpretation of boolean equations)
3. Try some simulation software such as ladder logic etc.
 

If have knowledge of industrial electronics (sensors, instrumentation and control), then u should first choose a PLC, like the one most popular where u live... and practice on it..
 

You can check out http://www.PLCMentor.com

You can also try the tutorials on http://www.AutomationNC.com

It has training videos and a mix of free and subscription training.

You can also try youtube. AutomationNC has some of the PLCMentor.com training available on youtube.

To master a PLC you have to do. There is no other way to really learn programming than to actually jump in and do a project; however, you will need some sort of mentor along the way...

Russell
 

Hi, You can download a simulator from www.TheLearningPit.com Logixpro simulator for trial. Also look for a Book
Programmable logic controllers by Frank Petrouzella and
Lab manual : Programmable logic contrllers by the same Auther with a CD containing the Logixpro simulator.

Also some people downloaded the cracked version of the simulator from the internet.

This will teach you PLC and it is simillar to Allan Bradlly PLC.

I hope this is of great benefit to you

Rashad Alkakkali
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top