Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Toshiba Satellite 2800-s02 start up problem

Status
Not open for further replies.
M

MRFGUY

Full Member level 1
Joined
Sep 16, 2003
Messages
98
Helped
9
Reputation
18
Reaction score
3
Trophy points
1,288
Activity points
1,049
I am looking for the idea how to solve my notebook.

When I switch on system read the HDD then floppy and screen show nothing. after that it's hang.

Some time it read from HD and load win2k. After win logo, screen change to black and hang again.

I try to reset the battery the same error.

Even I can't go to bios setup.

I download the user manual already and it dosen't help to me.

Do you have any idea how to solve this problem myself. :cry:
 

Try to do this:
-take off your laptop´s memory and clean it,s contacts with a rubber, yes a rubber.
-test your power supply (you shoul do this first)
-take off al pcmcia cards, may be that one produces the failure
-dissarm it and test if the cpu cooling fan works propertly
-If it doesn´t work yet try with another memory module, if possible
-try without battery (only with outlet ps)

If you can´t make it work doing all this try with your technical service...
Good luck!!!
 

try to boot without any battery, just ac power
remove pcmcia cards
remove harddisk form notebook and boot it up. if u can go to bois then this means that there is problem in windows installation
try using system restore disks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top