Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to connect BSC to BSC?

Status
Not open for further replies.

mehdi_an

Advanced Member level 4
Joined
Jan 17, 2007
Messages
106
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
1,813
hello all friends
what do join bsc with bsc?
bye
 

bss

The interface is done via MSC. All BSC are connetcted to one or more MSC and from there they may communicate. There is no direct ineterface defined in GSM for BSC to BSC. However there is one in UMTS between RNCs and it is known as Iur.
Hope it helps
 

Re: bss

yes.
and BSC to MSC interface may be E1/T1
 

Re: bss

IT IT CONNECTED VIA E1 CHANNEL AS PER INDIAN STANDARD...........

TOTAL 16 E1 ARE TAKE OUT FROM ET CARD OF BTS & 1 E1 USE TO CONNECT BTS.

THAN OTHER REMAINING E1 BYPASS THAT BTS & MOVE FURTHER......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top