Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what are the advantages of DFT over DTFT.

Status
Not open for further replies.

wajahat

Advanced Member level 4
Joined
Feb 3, 2006
Messages
102
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
2,097
advantages of dft

Hi all, i want to know if dtft can be calculated using dft what are its advantages.One can calculate the dtft directly.why to use dft.
Any response in this regard would be helpful.
regards
wajahat.
 

advantages of dft over dtft

Hi,

DFT is completely discrete both in frequency and time, however DTFT is only discrete in time but continueous in frequency. DTFT is not used in actual digital signal processing, its DFT which is mostly calculated using fast algorithms called FFT algorithms.
 

advantages of dft method

jahmad quoted
DFT is completely discrete both in frequency and time, however DTFT is only discrete in time but continueous in frequency. DTFT is not used in actual digital signal processing, its DFT which is mostly calculated using fast algorithms called FFT algorithms.
I know that dft is for finite sequences.Now if dft is used in actual digital signal processing ,how dft is calculated for infinite sequences or there are no infinite sequences in actual dsp they are present omly in theory.
Any explanation of the above queries would be helpful.
Thanks
wajahat
 

calculating the dtft from the dft

Your second question (comprehensively answered by jahmad ) is completely different from the first question. Hope thats your intention.

Obviously, you cannot deal with infinite sequnces in pratice, you always do the FT on a limited number of samples.
-b
 

advantages fft over dft

Hi
Signal processing of infinite (or finite and long duration) signals is done with truncation of signal with some known window. You can search this method by searching window.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top