Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

having problem with APR9600

Status
Not open for further replies.

udaysalgatti

Newbie level 1
Joined
Oct 31, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Sir,

I have recorded 8 different messages in APR9600 but when i connect to 89s52, only first message will play not all .
so what is the problem . this is my prg
e,g.
(
mov a,#11101111b
mov p3,a ;msg 4
acall longtime1

mov a,#11110111b
mov p3,a ;msg 5
acall longtime1

mov a,#11111011b
mov p3,a ;msg 6
acall longtime1
)




second thing if any switch is pressed in room means like bulb,fan, the APR circuit stops working and busy LED will glow.

Can any body help me?
 

second thing if any switch is pressed in room means like bulb,fan, the APR circuit stops working and busy LED will glow.

Can any body help me?

Do you have sufficient decoupling? Place bypass/decoupling capacitors across all power lines.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top