3BABY
Member level 5
- Joined
- Jan 14, 2011
- Messages
- 91
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- New Zealand
- Activity points
- 2,252
Hi Guys,
ive been scratching my head about this, have looked over the web but i cant seem to figure out what device to use. the problem:
i have a 150V signal coming from a Capacitor discharge ignition system that goes into a coil to produce high voltage that goes toward the spark plug (i.e. CDI). i want to obtain and analysie the timing of the signal from in between the capacitor and the coil and record it on a logic probe. this is ~150V very low current.
i need some device that will convert the 150V pulse to between 5V-3.3V. the device needs to be fast.
i do not (unfortunately) own scope that has a record function.
can anyone suggest a device that would be suitable for this application?
Thanks all!
ive been scratching my head about this, have looked over the web but i cant seem to figure out what device to use. the problem:
i have a 150V signal coming from a Capacitor discharge ignition system that goes into a coil to produce high voltage that goes toward the spark plug (i.e. CDI). i want to obtain and analysie the timing of the signal from in between the capacitor and the coil and record it on a logic probe. this is ~150V very low current.
i need some device that will convert the 150V pulse to between 5V-3.3V. the device needs to be fast.
i do not (unfortunately) own scope that has a record function.
can anyone suggest a device that would be suitable for this application?
Thanks all!