Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Metal simplex – simple guitar effect

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


It is a home made guitar effect for guitar Metal Simplex.

Schematic of the simple effect:

7974188400_1330698279.jpg



It was made of two transistors and a LED. Then a PCB and housing was added. Some modifications were made to provide the correct and satisfactory sound.



Double potentiometer was applied for „gain” and it consists of combined 100K and 22K (it can be made two double potentiometers by changing their bottom halves). The additional potentiometer inserted betweeen transistors 1 and 2 causes change of characteristics from overdrive to distortion. Different transistors were tested, but finally BC546B was chosen. There is also an additional capacitor which improves the operation of „tone” potentiometer.

LED can be placed outside the housing and thus you have a meter.

Pictures:



Corrections:



Link to original thread (useful attachment) - Prosty efekt gitarowy - Metal simplex
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top