Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

4x4x4 Led Cube Atmega16 – cube

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


This is a projecst of a Led Cube. It was built of 5mm blue diffusion LEDs and mounted on the universal board. Scheme of the board in Eagle can be found at: LINK. After assembling all the elements, the system operates correctly.

Scheme:



Elements used:
  • Atmega16 + stand
  • 64 LEDs (diffusion, blue) 5mm
  • 2 LEDs (red, green) 5mm
  • resistor (220ohm) x18
  • resistor (470ohm) x2
  • resistor 10koh x5
  • transistor BC338 NPN x4
  • capacitor 10uF x1
  • capacitor 1000uF x1
  • ceramic capacitor 0,1uF x2
  • ceramic capacitor 22pF x2
  • quartz resonator 14.7456 MHz
  • micro-switch x4
  • power socket
  • universal board 160x100mm
  • ON/OFF switch
  • HEADER bar
  • 5V regulator

Pictures:

LED levels:



Construction of the system:





Link to original thread (useful attachment) – Led Cube 4x4x4 Atmega 16. Kostka sześcienna
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top