Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Effect of EMC tests on RF frequencies or RF modules

Status
Not open for further replies.
A

adnansarwar2050

Member level 2
Joined
Oct 12, 2011
Messages
52
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,288
Location
Islamabad
Activity points
1,589
I want to know that what are the effects of EMC tests (Fast Transient Burst and Surge) on RF modules and radio frequencies
 

EMC testing serves to find how e.g. transient bursts and surges affects component or system functioning.
Such effects usually destroy or push out of operation sensitive components. Thus they should be protected from such damage by design. At system operating frequencies the interference is defined by IEC standards.
 

EMC also include radiated MASK test and spurious emssion test, that is very important to pass the type approval certification.
 

For example, EMC burst can mess control registers of VCO (if used). Or go through antenna directly to schottky diodes or FET and burn it out.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top