Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

altium designer help:Missing negative net for diff pairs

Status
Not open for further replies.
K

K.Srikanthreddy

Junior Member level 2
Junior Member level 2
Joined
Dec 8, 2011
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,392
In schematic regarding diff pairs i had one issue "Missing negative net for diff pairs [ACKT_CON+], positive net [ACKT_CON+]" and "Missing negative net for diff pairs [ACKT_CON-], positive net [ACKT_CON-]"

and "same parameter contains different types:String,float
Date=Uniqueid:HVJLGRYG
Date=Uniqueid:CRQASQHE

Thanks in advance
 

diff net pairs need to end with a "_P" and "_N" extension. Otherwise you need to add them manually.

Look for Interactive Differential Pair and Multi-trace (Bus) Routing in Atlium
and : "HiSpeedDesignTutorialforAltiumDesigner.pdf"
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top