Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can I Ask for this programme! form C to Hex !

Status
Not open for further replies.
A

Amer Shanteer

Newbie level 6
Joined
Apr 6, 2008
Messages
11
Helped
0
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,354
Dear ALL ,

Kindly , can you provide me a programme that i can write my programe in C and translate it to Hex file for PIC . !!



Thanks ,
Amer !
 

There are several available C compilers:

**broken link removed**

MikroC Pro for PIC

The above are two of the most popular and have free downloads of the compilers, but will run in a limited fashion.

BigDog

---------- Post added at 09:29 ---------- Previous post was at 09:27 ----------

Here is an Open Source Compiler for PICs as well:

SDCC - Small Device C Compiler
 
  • Like
Reactions: bassa

    bassa

    bassa

    Points: 2
    Helpful Answer Positive Rating
Thanks a lot ..........!

---------- Post added at 11:15 ---------- Previous post was at 11:06 ----------

i can't download it !!
 

in this time i cant i will try to download it in other time then i will confirm !

cause a network problem !
 

Every thing OK . but i want to ask you if this program it use for C+ Language !!

And if there is ***** for it ~?
 
Amer Shanteer said:
Every thing OK . but i want to ask you if this program it use for C+ Language !!
Click to expand...

While there are a few C++ compilers available for embedded development, today the vast majority of coding for an embedded processor or MCU is done in C or Assembly Language.

IAR and SourceBoost have the only two comercial C++ compilers for PICs that I am aware of and they implement only a subset of the C++ features.

SourceBoost Technologies




Amer Shanteer said:
And if there is ***** for it ~?
Click to expand...

If you can rephrase the question so that it is not censored, I will attempt to answer it.



BigDog
 
I asked if there Activate PRO/Stander mode for picc-9_82-win !!! ??
 

When first installed the Hi-Tech C Compiler runs without any limitations, except for code optimization.

Once you register the compiler and install the license key all levels of code optimization are available instead of the restriction to the first two levels.

Code optimization is the only difference between a licensed and unlicensed version.

BigDog

---------- Post added at 16:21 ---------- Previous post was at 14:54 ----------
Amer Shanteer said:
how we can get license key !! free !!
Click to expand...

I couldn't tell you. I had to purchase mine. They may have an academic discount program.

Amer Shanteer said:
cause i have lot of function to create
Click to expand...

There are no code size limitations for the unlicensed version. You can code as large a program as your device will hold.

BigDog
 

and asking if must C programme , must be installed ? on the PC to i can programme !
 

Don't forget - for the big PICs the manufacturer is also providing C compilers and there are students versions to download for free. These are integrated in MPLab so you have a complete development platform, very powerful by the way and also very handy to start working with micro controllers.
 

Amer Shanteer said:
and asking if must C programme , must be installed ? on the PC to i can programme !
Click to expand...

Can you rephrase the question?

Are you asking whether you can program in C on the same PC the Embedded C Compiler or CrossCompiler is installed?

The answer to that question is Yes. However, if I misunderstood you please rephrase the question.

BigDog
 
i asking this question , cause i cant find the .EXE file of the above program ( HI-TECH C for the PIC10/12/16 MCU Family ,)

i open the folder of setup i i couldn't find any exe file !!

and i asking if there isn't C program ... the program ( HI-TECH C for the PIC10/12/16 MCU Family ) can i use it ! and every thing be ok!

---------- Post added at 09:25 ---------- Previous post was at 09:23 ----------

and when i install the program and open the folder of it i can not find the exe file!؟
 

Maybe you are having network issues. Here is latest installation, file attached.

HI-TECH C Compiler for PIC10/12/16 MCUs (PRO/Standard/LITE) Update v9.82

Unzip the attached file and you will have one EXE file to run the installation.

Download the User Manual in PDF form from the link in my previous post.

BigDog
 

Attachments

  • picc-9_82-win.zip
    13.6 MB · Views: 93
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top