Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST Studio simulation

Status
Not open for further replies.
P

prasan1988

Newbie level 4
Joined
Sep 29, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,319
hi,
im new to this forum...im workin on cst tool for my project...

I want to know how to obtain results for S(2,1),S(2,2).,,so on.
Under 1D results only S(1,1) results are available..

if anyone knows..Pls help me in this regard...
 

This is a good tutorial which describes how to use CST for designing a patch antenna.

Hope this will be useful if you are new to CST.

**broken link removed**
 
thank you for the quick reply:)..the tutorial was a bit helpful..
 

Hiprasan1988!
You propabley have only one port - for S2,1 or S3,1 results you need 2 ports or 3 respectively.

Good luck!
 

if you define two ports in CST you can use S11, S12, S21, S22. they are located in 1D results.
 

I agree with hamid
if u use multi ports in CST,automatically CST defined network of S parameters
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top